Skip to content

Omron CJ, CP and 1S spares: when the successor is not a drop-in

Omron publishes a discontinuation notice for every model it retires, with dates and a recommended replacement. The CJ1W-ETN21 notice shows why the replacement still needs reading.
Author
Sparehawk
Reading time
3 min read
Published
  • PLC
  • Drives
  • Part numbers

Omron’s recommended replacement is not always a drop-in spare. Each discontinuation notice lists what the new model does differently. The CJ1W-EIP21S, which replaces the CJ1W-ETN21 Ethernet unit, drops mail send and receive and the web functions, and it draws more power. For a machine that should run unchanged, the same model is still the like-for-like spare; moving to the successor is a project.

Omron retires products model by model and says so in writing. Each discontinuation notice names the model, the recommended replacement, the last order date, the last shipping date and the end of maintenance service. That makes planning easier than with most manufacturers. The notice also lists what the replacement does differently, and that list is the part to read.

An example: CJ1W-ETN21

The CJ1W-ETN21 Ethernet unit for CJ-series controllers is being discontinued in favour of the CJ1W-EIP21S. According to Omron’s discontinuation notice for the unit:

  • the last order date is the end of March 2027, the last shipment the end of September 2027, and maintenance service ends in March 2034;
  • the reason is security: the new unit adds secure communication, tag data links and CIP messaging;
  • and the new unit drops functions the old one had: mail send and receive and the web functions are not available on the CJ1W-EIP21S, and it draws 0.65 A at 5 V DC against 0.37 A for the old unit.

So a machine that sends alarm emails from its PLC loses that function with the “recommended replacement”, and a rack with little spare power-supply capacity may need its budget checked. For a machine you want to keep running unchanged, an ETN21 of the same model is still the like-for-like spare. The migration is a project, with Omron’s replacement guide (Cat. No. P152) as its starting point.

Searching by family

The prefix on the label tells you the family. Search by it, or by the full model:

  • R88M servo motors and R88D servo drives;
  • CJ1 controllers and units, CJ2 controllers and CP1, CP2 compact controllers;
  • NJ, NX controllers;
  • 3G3 inverters;
  • NS, NA, NB operator panels.

Start with CJ1W or R88D, or browse all Omron parts.

Servo motors and drives come as a pair

An R88D drive and an R88M motor are selected together: the motor’s rating and encoder have to be ones the drive supports. When one fails, the simplest spare is the same model. A different motor or drive generation means checking the pair against Omron’s combination tables in the manual, and re-tuning the axis.

Before you order

  • Copy the full model from the label, including suffixes such as -V1 or the letters after the CPU number. Omron’s notices list models exactly, and so should your request.
  • For a CPU, note the unit version on the label; the programming software checks it.
  • Look up the notice for your model on Omron’s site. If a replacement is named, read its “differences” table before you decide.
  • Ask what “refurbished” covered. See refurbished, surplus and used and warranty on surplus parts.

Not listed? Send a request with the label photo: how requests work.

01

Frequently asked questions

1.1

What replaces the Omron CJ1W-ETN21?

Omron names the CJ1W-EIP21S as the recommended replacement. It adds secure communication, tag data links and CIP messaging, but it has no mail send and receive and no web functions.
1.2

When can I still order a CJ1W-ETN21 from Omron?

According to Omron’s notice, the last order date is the end of March 2027 and the last shipment the end of September 2027. Maintenance service ends in March 2034.
1.3

Does the CJ1W-EIP21S draw more power than the ETN21?

Yes. It draws 0.65 A at 5 V DC against 0.37 A for the ETN21, so check the power-supply budget of a rack with little spare capacity.
1.4

Can I replace an Omron R88D servo drive with a different generation?

Only after checking the drive and motor pair against Omron’s combination tables in the manual, and re-tuning the axis. The simplest spare is the same model.
1.5

What should I copy from an Omron label before I order?

The full model with every suffix, such as -V1, and for a CPU the unit version. The programming software checks the unit version.
02

All posts

    Go to