Skip to content

Allen-Bradley spares: catalogue number, series letter, firmware

A 1756, a 1769 or a 2711P on the label tells you the platform. The series letter and the firmware revision decide whether the spare runs your program. What to read off the module before you order.
Author
Sparehawk
Reading time
3 min read
Published
  • Rockwell
  • PLC
  • Part numbers

An Allen-Bradley spare has to match three things from the label: the full catalogue number, the series letter and, for controllers and communication modules, the firmware revision. The first block of the catalogue number names the platform, such as 1756 for ControlLogix. The series letter marks a hardware revision, and the firmware has to match the project the controller runs, or the project has to be converted.

An Allen-Bradley catalogue number starts with the platform: the first block says whether a module belongs to ControlLogix, CompactLogix, SLC 500 or a PowerFlex drive before you read anything else. That makes the family easy to find. It does not make two modules with the same number interchangeable: the series letter and, for controllers and communication modules, the firmware revision matter just as much.

The first block names the platform

First block Platform
1756 ControlLogix
1769 CompactLogix
1746, 1747 SLC 500
1794 FLEX I/O
1762–1766 MicroLogix
1785 PLC-5
2711, 2711P PanelView operator panels
2094–2098, 2198 Kinetix servo drives
20…, 22…, 25… PowerFlex drives

Search by the block to see the family, for example 1756, 1747 or 2711P, or browse all Allen-Bradley parts.

The series letter

Rockwell revises hardware without changing the catalogue number and marks each revision with a series letter (Series A, B, C…) on the label. A later series is usually backward-compatible, but not always in both directions, and some series changes alter what the module needs from the chassis or the firmware it accepts. When you order a spare, give the series from the label, and ask the supplier for the series of the unit they have.

The firmware revision

For a ControlLogix or CompactLogix controller, the firmware revision has to match the project it runs, or the project has to be converted in Studio 5000. Communication modules have firmware too. A used controller can arrive at any revision. Before you order, note the revision your project is saved at, and ask the supplier which revision the unit carries. If it differs, plan for a firmware flash before the unit goes into the machine.

Lifecycle status

Rockwell publishes a lifecycle status for every catalogue number (Active, Active Mature, End of Life, Discontinued) and explains what each one means on its product lifecycle status page. Check the exact catalogue number, not the family: within one platform, some modules can be discontinued while their neighbours are still sold. Finding a replacement part shows where Rockwell names the successor, and PowerFlex 4 to PowerFlex 525 walks through one such change in detail.

Before you order

  • Copy the full catalogue number, the series letter and, for controllers and network modules, the firmware revision from the label.
  • Photograph the label. It is the fastest way for a supplier to confirm they have the same unit.
  • Ask what “refurbished” covered. Refurbished, surplus and used explains the conditions, and how to check for counterfeits covers what to look at when the part arrives.

Not listed? Send a request with the label photo: how requests work.

01

Frequently asked questions

1.1

Are two Allen-Bradley modules with the same catalogue number interchangeable?

Not always. Rockwell revises hardware without changing the catalogue number and marks each revision with a series letter. Give the series from your label and ask the supplier for the series of the unit they have.
1.2

Does a later series always replace an earlier one?

Usually, but not always in both directions. Some series changes alter what the module needs from the chassis or which firmware it accepts, so check the series before you order.
1.3

What if a used ControlLogix controller arrives at a different firmware revision?

The firmware has to match the project the controller runs, or the project has to be converted in Studio 5000. Note the revision your project is saved at, ask the supplier which revision the unit carries, and plan a firmware flash if they differ.
1.4

How do I know whether an Allen-Bradley module is discontinued?

Rockwell publishes a lifecycle status for every catalogue number: Active, Active Mature, End of Life or Discontinued. Check the exact catalogue number, because modules within one platform can have different statuses.
1.5

Which platform does a catalogue number starting with 1747 belong to?

SLC 500. Catalogue numbers starting with 1746 or 1747 are SLC 500 modules; 1756 is ControlLogix and 1769 is CompactLogix.
02

All posts

Related

    Go to